Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual page 237

Procedure
Proceed as follows to insert a converter into the project:
1. Double-click "Add new device" in the project tree.
The corresponding dialog box opens.
①
"Device name" input field ("Drive unit_xx" by default)
②
"Drives" button
③
Enable/disable the "Open device view" option
④
Firmware version drop-down list
Figure 8-2 Inserting a converter into the project
2. Click "
3. Expand the "SINAMICS S200" entry in the displayed list.
A list of all available SINAMICS S200 Basic and S200 PROFINET converters is displayed.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
②
" to display the available SINAMICS converters.
8.5 Combining and configuring devices in the project
Commissioning (Startdrive)
235