Table of Contents
Advertisement
1.5
Important product information
1.5.1
Intended use
Requirement
Death or serious injury if not used as intended
Not using as intended can result in hazardous states.
• Carefully observe the description of intended use.
Incorrect use of the motor
Incorrect use of the motor may cause death, serious injury (crushing) and/or property damage.
• Carefully observe the description of intended use.
• Do not use the motors in hazardous areas (where there is a risk of explosion), if the motors
• Make sure that the conditions at the location of use comply with all the rating plate data.
• Make sure that the conditions at the location of use comply with the conditions specified in
Note
It cannot be guaranteed that EMC emission limits are complied with if the products are
connected to an isolated line supply grounded through a high ohmic connection or a line supply
with grounded line conductor.
• Draw-up an EMC plan to comply with the EMC requirements of the intended application.
Description
The products described in this manual, together with software, accessories and options, form an
electric drive to supply low-voltage AC motors.
The products are professional equipment for stationary indoor use in industrial, light-
industrial, and commercial applications and are intended for supply from non-public
(industrial) low-voltage line supplies. The products are not intended for use in residential
areas and are not intended for supply from public low-voltage networks.
The products must be properly transported and stored and must be installed, commissioned
and maintained by professionals who have adequate knowledge to implement the safety,
cybersecurity and EMC measures in accordance with the specifications described in this
manual and with recognized state-of-the-art engineering practice.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
WARNING
WARNING
have not been expressly released and authorized for these types of applications. Carefully
observe any special supplementary notes that may be attached.
this documentation. When necessary, take into account deviations regarding approvals or
country-specific regulations.
Introduction
1.5 Important product information
21
Advertisement
Table of Contents
