Table of Contents
Advertisement
• Scenario 1: No drive password is configured in the source and target converters.
1
– Click on "Restore".
• Scenario 2: No drive password is configured in the source converter. On the other hand, in
the target converter function "Drive data encryption" had been previously activated and a
drive password configured.
1
– Click on "Restore".
– Enter the drive password of the target converter.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
The drive data are loaded into the converter from the backup file.
As a consequence, the status of the settings at the instant of the backup are restored.
A dialog to enter the password opens.
The drive data are loaded into the converter from the backup file.
As a consequence, the status of the settings at the instant of the backup are restored.
Function "Drive data encryption" is activated. The configured drive password is still
effective in the target converter after data has been restored.
13.1 Service and maintenance for the converter
2
2
Corrective maintenance
3
3
595
Advertisement
Table of Contents
