Cables And Connectors; Motion-Connect Cables And Connectors - Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual

Description
3.4 Accessories
3.4.2

Cables and connectors

3.4.2.1

MOTION-CONNECT cables and connectors

Description
Siemens recommends that you use MOTION-CONNECT prefabricated cable assemblies and
connectors for connecting the motor to the converter. All Siemens cable assemblies and
connectors are tested and compliant with CE standards and EMC requirements.
Table 3-6 Overview of MOTION-CONNECT 350 and 380 cables
MOTION-CONNECT 350 and 380 cables
Type
Dual cable with hybrid connec‐
tor:
Power cable (with brake conduc‐
tors) +
2)
encoder cable
Dual cable with hybrid connec‐
tor:
Power cable (without brake con‐
ductors) +
encoder cable
60
Article Applicable
number 1FL2 motor
6FX3☐02- 1)
7DD01- SH20
☐☐☐☐
SH30
7DN01-
SH40
☐☐☐☐
7CD01-
☐☐☐☐
7CN01-
☐☐☐☐
Cross-section for conductors
(mm )
2
• Power cable (with brake con‐
ductors):
– 4 × 0.75 + 2 × 0.38
(4 × 18 AWG + 2 × 22 AWG)
• Encoder cable:
– Cable length ≤ 15 m:
3 × 2 × 0.25
(3 × 2 × 24 AWG)
– Cable length 20 m or 30 m:
2 × 2 × 0.25 + 2 × 0.38
(2 × 2 × 24 AWG + 2 × 22 A
WG)
• Power cable (without brake con‐
ductors):
– 4 × 0.75 (4 × 18 AWG)
• Encoder cable:
– Cable length ≤ 15 m:
3 × 2 × 0.25
(3 × 2 × 24 AWG)
– Cable length 20 m or 30 m:
2 × 2 × 0.25 + 2 × 0.38
(2 × 2 × 24 AWG + 2 × 22 A
WG)
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Connectors
Drive Motor
side side
6FX2003 6FX2003-
-
0DE61 3HD00
3HN00
3HD00
3HN00