Table of Contents
Advertisement
7.4.5.2
User-defined parameter list
Overview
A user-defined parameter list is a combination of specific parameters from the standard
parameter list of the converter. These can be used to configure frequently used user functions,
for example.
Description of function
To create a user-defined parameter list, click
With the user-defined parameter lists, the web server provides the following functions:
• Creating up to 20 user-defined parameter lists
• Configuring list properties
– Name
– Position or sequence of the tabs
– Comment
– Delete list
• Exporting and importing user-defined parameter lists
Export:
– Export one or several user-defined parameter lists.
– The web server exports the lists exclusively as a json file.
– Export files generated by the web server can be imported into a Startdrive project.
Import:
– The list import function in the web server exclusively imports json files.
– User-defined parameter lists exported via the web server or Startdrive as a json file can be
If values are changed, the data must be saved retentively.
7.4.6
Backup and restore
7.4.6.1
Overview
Overview
With "Backup and restore" you can back up parameters and other settings and restore the
settings again if necessary.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
imported into another drive of the same type via the web server.
Requirement: same drive type and same firmware version
Commissioning (web server)
7.4 Functions and menus
in the function view "Parameter list".
199
Advertisement
Table of Contents
