Table of Contents
Advertisement
Description
3.1 System overview
3.1.2
Motor
Description
The 1FL2 motor is intended for use with the S200 converter product line. The motor is available
in the 200 V variant (low or medium inertia) and the 400 V variant (low, medium, or high
inertia), and with different shaft heights.
Table 3-2
Shaft height
SH20
SH30
SH40
SH48
SH52
SH45
SH65
SH90
3.1.3
MOTION-CONNECT 350 and 380 cables
Description
Prefabricated MOTION-CONNECT cables are used to connect the 1FL2 motor to the S200
converter product line. The cables are available in two variants:
• MOTION-CONNECT 350 standard cable, which provides a connection solution for fixed
installation applications
• MOTION-CONNECT 380 drag chain cable, which provides a connection solution for drag
chain installation applications that require a high number of bending cycles
44
Motor variants
Moments of inertia
Low inertia
Low inertia, medium inertia
Medium inertia
Low inertia
High inertia
Rated power (kW)
0.05, 0.1
0.2, 0.4
0.75, 1.0
1.0, 1.5
1.45, 2.1
0.4, 0.75
0.75, 1.0, 1.5, 1.75, 2.0
2.5, 3.5, 5.0, 7.0
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Mains supply network
200 V/400 V
400 V
Advertisement
Table of Contents
