Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual page 127

Note
Additional fixing of the cable
If between the cable strain relief on the cable carrier and the terminal at the motor, part of the
cable is hanging loose or is not routed, Siemens recommends that the cable is additionally fixed
for vibration load and with horizontal or vertical cable entries.
• Additionally fix the cable where the motor is fixed so that machine vibrations are not
transferred to the connector.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Mounting
5.2 Motor
125