Table of Contents
Advertisement
Appendix
A.3 Parameters
r11570
EPOS actual acceleration
Data type: FloatingPoint32
Read permission:
Write permission:
Parameter group:
Unit: mm/s²
Description:
Displays the acceleration value currently being processed.
Dependency:
See also: p2572
Note
The maximum acceleration from p2572 is effective in operating mode "Jog" and "Active homing".
r11570
EPOS actual acceleration
S200 Basic PN (EPOS
Data type: FloatingPoint32
Lastseite rotierend),
Read permission:
S200 PN (EPOS
Write permission:
Lastseite rotierend)
Parameter group:
Unit: °/s²
Description:
Displays the acceleration value currently being processed.
Dependency:
See also: p2572
Note
The maximum acceleration from p2572 is effective in operating mode "Jog" and "Active homing".
r11571
EPOS actual deceleration
Data type: FloatingPoint32
Read permission:
Write permission:
Parameter group:
Unit: mm/s²
Description:
Displays the deceleration value currently being processed.
Dependency:
See also: p2573
Note
The maximum deceleration from p2573 is effective in operating mode "Jog" and "Active homing".
r11571
EPOS actual deceleration
S200 Basic PN (EPOS
Data type: FloatingPoint32
Lastseite rotierend),
Read permission:
S200 PN (EPOS
Write permission:
Lastseite rotierend)
Parameter group:
Unit: °/s²
Description:
Displays the deceleration value currently being processed.
Dependency:
See also: p2573
Note
The maximum deceleration from p2573 is effective in operating mode "Jog" and "Active homing".
872
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Jog, Traversing blocks, Direct setpoint input (MDI)
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Jog, Traversing blocks, Direct setpoint input (MDI)
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Jog, Traversing blocks, Direct setpoint input (MDI)
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Jog, Traversing blocks, Direct setpoint input (MDI)
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Advertisement
Table of Contents
