Connecting The Mains Supply; Interface Description - X1; Wiring - Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual

Connecting
6.4 Connecting the mains supply
6.4

Connecting the mains supply

6.4.1

Interface description - X1

Overview
The converter connects to the mains supply via terminals L1, L2, and L3 on the interface X1.
Description
Table 6-3
X1
For applications on the single-phase mains supply network
1)
6.4.2

Wiring

Requirement
You have assembled the converter line supply cable.
132
Interface X1
Terminal Designation
L1 Line phase L1/line phase L
L2 Line phase L2
L3 Line phase L3/neutral N
Technical data
1) Maximum current limit: 20 A
1)
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB