3.4.3.4
Mounting instructions for the line filter
Description
• Observe the requirements for "EMC-compliant installation (Page 92)" when mounting the
line filter.
• To achieve a low-impedance connection, mount the line filter on the same metallic mounting
plate as the converter. Mount these two components as close as possible.
Figure 3-11
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Connecting the line filter (example)
Description
3.4 Accessories
69