Table of Contents
Advertisement
Appendix
A.3 Parameters
Index:
[0] = Lower torque limit 0
[1] = Lower torque limit 1
[2] = Lower torque limit 2
[3] = Lower torque limit 3
c29063
Speed limit selection bit 0
Data type: Unsigned8
Read permission:
Write permission:
Parameter group:
Unit: -
Description:
Signal of bit 0 for the speed limit.
c29064
Speed limit selection bit 1
Data type: Unsigned8
Read permission:
Write permission:
Parameter group:
Unit: -
Description:
Signal of bit 1 for the speed limit.
p29070[0...3]
Speed limit in positive direction of rotation
Data type: FloatingPoint32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: rpm
Min:
0.00 [rpm]
Description:
Sets the maximum speed for the positive direction.
Three internal speed limits in total are available.
With the combination of the digital input signals Speed limit selection bit 0 and Speed limit selection bit 1, you can
select one of the three internal speed limits as the source of the speed limit.
Index:
[0] = Speed limit for positive direction 0
[1] = Speed limit for positive direction 1
[2] = Speed limit for positive direction 2
[3] = Speed limit for positive direction 3
Dependency:
The default value depends on the maximum motor speed.
p29071[0...3]
Speed limit in negative direction of rotation
Data type: FloatingPoint32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: rpm
874
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Speed limiting, Technology Extensions
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Speed limiting, Technology Extensions
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Ready for operation
Technology Extensions
Max:
210000.00 [rpm]
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Ready for operation
Technology Extensions
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Factory setting:
210000.00 [rpm]
Advertisement
Table of Contents
