Table of Contents
Advertisement
8.8.4
Terminating the online connection from the converter
Overview
After you traverse your converter from the control panel or optimize the axis, you need to
disconnect the online connection to the converter.
Requirement
• For activated user management (UMAC):
The function rights required to edit the converter data are activated for your user account.
Details on this topic are provided in Chapter "Security settings in Startdrive" of Industrial
Cybersecurity Configuration Manual
109810578).
Procedure
Proceed as follows to
1. Click the drive in the project tree.
2. Click
Result
The online connection to the converter is disconnected.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
(https://support.industry.siemens.com/cs/ww/en/view/
in the menu bar.
Commissioning (Startdrive)
8.8 Optimizing commissioning
293
Advertisement
Table of Contents
