Table of Contents
Advertisement
Table 3-8
Name
I/O cable (20 pins)
I/O connector (20 pins)
More information
For more information about the I/O cable and connector, see Section "Connecting the inputs and
outputs (Page 153)".
For more information about how to assemble the I/O connector, see Section "Assembling the
I/O connector (Page 884)".
3.4.3
Line filter
Description
Line filters limit the conducted interference emissions from the converters to the permissible
limit values according to IEC 61800-3 Category C2.
Line filters are passive components used to expand the EMC properties of the servo drive
system.
Siemens recommends that you use a line filter to protect the system from high frequency
noise.
Note
For applications in European Union, UK, and Korea, the use of the recommended line filters is
mandatory to fulfill the local EMC directives.
Note
The maximum length of the cable used to connect the line filter to the converter is 3 m.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
I/O cable and connector
Article number
6SL5562-1XX00-0AC0
6SL3260-2MA00-0VA0
Description
3.4 Accessories
Length (m)
1
-
63
Advertisement
Table of Contents
