Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual page 745

Dependency: PT1 low pass: p1422
PT2 low pass: p1423, p1424
General filter: p1423 ... p1426
p1422[0] Speed setpoint filter 2 time constant
Data type: FloatingPoint32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: ms
Min:
0.00 [ms]
Description: Sets the time constant for the speed setpoint filter 2 (PT1).
Dependency: See also: p1414, p1421
Note
This parameter is only effective if the speed filter is set as a PT1 low pass.
p1423[0] Speed setpoint filter 2 denominator natural frequency
Data type: FloatingPoint32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: Hz
Min:
0.5 [Hz]
Description: Sets the denominator natural frequency for speed setpoint filter 2 (PT2, general filter).
Dependency: See also: p1414, p1421
Note
This parameter is only effective if the speed filter is parameterized as a PT2 low pass or as general filter.
The filter is only effective if the natural frequency is less than half of the sampling frequency.
p1424[0] Speed setpoint filter 2 denominator damping
Data type: FloatingPoint32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: -
Min:
0.001
Description: Sets the denominator damping for speed setpoint filter 2 (PT2, general filter).
Dependency: See also: p1414, p1421
Note
This parameter is only effective if the speed filter is parameterized as a PT2 low pass or as general filter.
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB
Visible in: Extended display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Operation
Speed setpoint filter
Max:
5000.00 [ms]
Visible in: Extended display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Operation
Speed setpoint filter
Max:
16000.0 [Hz]
Visible in: Extended display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Operation
Speed setpoint filter
Max:
10.000
A.3 Parameters
Factory setting:
0.00 [ms]
Factory setting:
2000.0 [Hz]
Factory setting:
0.700
Appendix
743