Siemens SINAMICS SIMOTICS S200 PROFINET Operating Instructions Manual page 884

Appendix
A.4 Assembling cables
3. Insert the conductors into the connector with the correct order, pushing through until the
conductor ends reach the end of the connector.
4. Insert the connector into the IDC slot in the crimping tool and crimp the connector. Make sure
that red, yellow, and green conductors face up.
5. Assemble the shielding A.
882
Pin Conductor color
1 White
2 Red
4 Green
Pin Conductor color
5 Yellow
7 Pink
8 Blue
SINAMICS S200 PROFINET servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646752B AB