Commissioning A Drive - Siemens Sinamics S120 Getting Started

Commissioning a drive

The control panel allows you to perform basic tasks for operating, monitoring, and testing the
drive. For operation, the symbols
diagnostic functions are available.
You can find more information about these functions in the SINAMICS S120 Drive Functions
Function Manual.
ON/OFF enable
1. In the project navigator, click on the "+" symbol before the entry "S120_CU320_2_DP".
2. In the project navigator, click on the "+" symbol before drive "SERVO_02."
3. Double-click on the entry "Expert list."
4. Scroll to the right through the expert list to parameter p0840 for the ON/OFF signal.
Figure 7-1
Getting Started
Getting Started, (GS1) 04/2014, 6SL3097-4AG00-0BP3
On/off signal
(START), (STOP), and
7
(TIP), and various
45