Firewall
ip_version any
label My packet filter
protocol any
src_zone external
(config)>
4. To enable a packet filtering rule, use the index number with the enable true command. For
example:
(config)> firewall filter 1 enable true
5. To disable a packet filtering rule, use the index number with the enable false command. For
example:
(config)> firewall filter 1 enable false
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Delete a packet filtering rule
To delete a packet filtering rule:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
LR54 User Guide
Use Digi Remote Manager to view and manage your
Packet filtering
866