Table of Contents
Advertisement
Revision history—90002452
Revision
Date
A
May 2022
B
June 2022
IX30 User Guide
Description
Initial release of the IX30 User Guide.
Release of Digi IX30 firmware version 22.5:
5G enhancements:
n
Added 5G slice support for configuring the slice
l
type for the 5G modems.
Added WAN Bonding as an add-on feature via Digi
n
Remote Manager for bonding multiple outbound
Internet connections together for increased maximum
throughput or data redundancy.
Surelink enhancements:
n
Enabled Surelink reset_modem action by default on
l
cellular interfaces and set fail count to three.
Updated Surelink reset_modem action to
l
automatically power cycle the modem in the event
that the modem fails to reset.
Serial port support enhancements:
n
Added serial PPP dial-in mode to handle AT-based
l
connection requests from a device connected to a
serial port and provide IPv4 networking to the
device.
Added suppport for Realport serial mode.
l
Added the ability to configure CPU performance and
n
power consumption.
Added cellular APN and cellular connection duration as
n
datapoints sent to Digi Remote Manager.
Wi-Fi scanner enhancements:
n
Added support for sending an HTTP or TCP stream
l
of results from the Wi-Fi scanner to one or more
remote servers.
SCEP enhancements:
n
New SCEP client settings and underlying
l
functionality to support connecting to additional
SCEP servers.
Added show scep Admin CLI command to show
l
the sync status, expiration dates, and additional
details of any configured SCEP clients.
VPN enhancements:
n
2
Advertisement
Table of Contents
