Local Area Networks (Lans) - Digi IX30 User Manual

Interfaces

Local Area Networks (LANs)

The IX30 device is preconfigured with the following Local Area Networks (LANs):
Interface
type Preconfigured interfaces
Local Area
n
Network
(LAN)
n
n
n
You can modify configuration settings for ETH2, and you can create new LANs.
This section contains the following topics:
About Local Area Networks (LANs)
Configure a Local Area Network (LAN)
Configure the WAN/ETH1 port as a LAN or in a bridge
Change the default LAN subnet
Show LAN status and statistics
Delete a LAN
DHCP servers
Default services listening on LAN ports
Configure an interface to operate in passthrough mode.
IX30 User Guide
ETH2
Loopback
Default IP
Default Link-local IP
Local Area Networks (LANs)
Devices Default configuration
Ethernet: Firewall zone:
n n
ETH2 Internal
IP address:
n
192.168.2.1/24
DHCP server
n
enabled
LAN priority:
n
Metric=5
Ethernet: Firewall zone:
n n
Loopback Loopback
IP address:
n
127.0.0.1/8
Ethernet: Firewall zone: Setup
n n
IP address
ETH2 n
192.168.210.1/24
Ethernet: Firewall zone: Setup
n n
IP address
ETH2 n
169.254.100.100/16
151
151
158
166
168
169
171
188
188
150