Optional) Configuring The Protection Action In Interface Security; Setting The Maximum Number Of Mac Addresses Learned By An Interface - Huawei Quidway S9300 Configuration Manual

9 Interface Security Configuration
By default, the interface security function is disabled on interfaces of the S9300.
----End
9.3.3 (Optional) Configuring the Protection Action in Interface
Security
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
The interface can be an Ethernet interface or a GE interface.
Step 3 Run:
port-security protect-action { protect | restrict }
The protection action in interface security is configured.
By default, the protection action is restrict.
----End
9.3.4 Setting the Maximum Number of MAC Addresses Learned by
an Interface
Context
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
interface interface-type interface-number
The interface view is displayed.
9-4
NOTE
If the sticky MAC function is disabled, this task can limit the maximum number of MAC addresses
l
dynamically learned by an interface.
If the sticky MAC function is enabled, this task can limit the maximum number of sticky MAC
l
addresses learned by an interface.
For the sticky MAC function, see
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Quidway S9300 Terabit Routing Switch
9.3.5 Enabling Sticky MAC on an
Configuration Guide - Security
Interface.
Issue 06 (2010–01–08)