Setting Rate Limit On Ports; Prerequisites; Configuration Procedure - Huawei Quidway S3100 Series Operation Manual

Operation Manual – QoS
Quidway S3100 Series Ethernet Switches
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] port trunk permit vlan 10
[Quidway-Ethernet1/0/1] quit
[Quidway] mirroring-group 1 remote-source
[Quidway] mirroring-group 1 mirroring-port ethernet1/0/2 outbound
[Quidway] mirroring-group 1 reflector-port ethernet1/0/5
[Quidway] mirroring-group 1 remote-probe vlan 10
[Quidway] display mirroring-group remote-source
# Configurations on switch B.
<Quidway> system-view
[Quidway] vlan 10
[Quidway-vlan10] quit
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] port trunk permit vlan 10
[Quidway-Ethernet1/0/1] quit
[Quidway] interface ethernet1/0/2
[Quidway-Ethernet1/0/2] port trunk permit vlan 10
# Configurations on switch A.
<Quidway> system-view
[Quidway] vlan 10
[Quidway-vlan10] remote-probe vlan enable
[Quidway-vlan10] quit
[Quidway] interface ethernet1/0/1
[Quidway-Ethernet1/0/1] port trunk permit vlan 10
[Quidway-Ethernet1/0/1] quit
[Quidway] mirroring-group 1 remote-destination
[Quidway] mirroring-group 1 monitor-port ethernet1/0/2
[Quidway] mirroring-group 1 remote-probe vlan 10
[Quidway] display mirroring-group remote-destination

1.10 Setting Rate Limit on Ports

1.10.1 Prerequisites

The rate limit is determined.

1.10.2 Configuration Procedure

Table 1-20 Set rate limit on ports
Operation
Enter system view
Command
system-view
Huawei Technologies Proprietary
1-20
Chapter 1 QoS Configuration
Description
—