Auto Logout - Siemens SIMATIC NET SCALANCE S615 Configuration Manual

The table has the following columns:
● Select
Select the row you want to delete.
● Interface
Via this interface the time is transferred using NTP.
● Listen
When enabled, the other devices can call up the time via this interface.
● Server Port
Enter the port of the NTP server.
The following ports are possible:
– 123 (standard port)
– 1025 to 36564
● Secure
When this is enabled, the NTP server becomes an NTP server of the type "NTP (secure)".
The following columns are only relevant for "NTP (secure)". Otherwise, these boxes cannot be
edited:
● Key ID
Enter the ID of the authentication key.
● Hash Algorithm
Specify the format for the authentication key.
● Key
Enter the authentication key. The length depends on the hash algorithm.
The following minimum lengths are recommended for the hash algorithm:
– DES: ASCII 8 characters
– MD5: ASCII 16 characters
– SHA1: ASCII 20 characters
● Key Confirmation
Enter the authentication key for confirmation.
4.5.9

Auto Logout

Setting the automatic logout
On this page, set the times after which there is an automatic logout from the WBM or the CLI
following user inactivity.
SCALANCE S615 Web Based Management
Configuration Manual, 11/2019, C79000-G8976-C388-08
Configuring with Web Based Management
4.5 "System" menu
173