Viewing Nat Rules And Rule Statistics; Viewing Current Nat Translations - Siemens E-110 User Manual

SIEMENS ADSL E-110_E-110-I user manual

Viewing NAT Rules and Rule Statistics

To view the NAT Rules currently defined on your system, select Services > NAT. From the NAT Options
drop-down list select NAT Rule Entry. The
To view data on how often a specific NAT rule has been used, click [Stats]. A page similar to the one below
displays:
The statistics show how many times this rule has been invoked and how many currently active sessions are
using this rule.

Viewing Current NAT Translations

To view a list of NAT translations that have recently been performed and which remain in effect (for any of
the defined rules), select Services > NAT. From the NAT Options drop-down list select NAT Translations.
The NAT Translations
For each current NAT translation session, the table contains the following fields:
Field
Trans Index
Rule ID
Interface
Protocol
48
NAT Rule Configuration
page displays.
Description
The sequential number assigned to the IP session used by this NAT translation session.
The ID of the NAT rule invoked.
The device interface on which the NAT rule was invoked (from the rule definition).
The IP protocol used by the data packets that are undergoing translations (from the
rule definition) Example: TCP, UDP, ICMP.
page displays.
Rev:01_040220