Cancel-Test (Link Failover); Show-Active-Leases (Dhcp Server); Switch Namespace Actions - Siemens RX1400 Reference Manual

RUGGEDCOM NETCONF
Reference Guide
• {crlFileName}
The amount of time, in minutes, to wait before starting the link failover test.
Section 6.3.4

cancel-test (Link Failover)

This action stops the link failover test on the specified interface. Specify the name of the interface in the <name>
element. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<services xmlns="http://ruggedcom.com/ns/rmf_services">
<link-failover>
<main>{interfaceName}</main>
<cancel-test/>
</link-failover>
</services>
</data>
</action>
</rpc>]]>]]>
• {interfaceName}
The name of the interface on which to stop the link failover test.
Section 6.3.5

show-active-leases (DHCP Server)

This action returns a list of active leases from the DHCP server. This action does not take any parameters.
<rpc message-id="101" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<action xmlns="http://tail-f.com/ns/netconf/actions/1.0">
<data>
<services xmlns="http://ruggedcom.com/ns/rmf_services">
<dhcpserver>
<show-active-leases/>
</dhcpserver>
</services>
</data>
</action>
</rpc>]]>]]>
Section 6.4

Switch Namespace Actions

This section describes how to perform actions related to switch namespaces using <rpc> messages through
NETCONF.
CONTENTS
• Section 6.4.1, "clear-stp-stats (Switch)"
cancel-test (Link Failover)
Chapter 6
RUGGEDCOM ROX II Actions
69