Mac Address - Siemens Giga762SX User Manual

Configuring Advanced Settings

MAC Address

If you already had Internet access through the same Internet service provider before
connecting the Giga762SX WLAN dsl, it is possible that the MAC address of one of your
PCs was used for registration when the connection was being set up. In this case, you
must either replace the current MAC address with the MAC address registered with the
Internet service provider or ask your Internet service provider to register a MAC address
for you.
Carry out the following steps:
ì
Connect a PC to the Giga762SX WLAN dsl and open the configuration environment.
ì
In the Advanced Settings menu, select: Internet – Internet Connection –
MAC Address
All settings apply for the displayed connection service that you selected for editing on
the Advanced Settings – Internet (page 62) screen. If you only set up one connection
service, this information is not displayed.
ì
Specify which MAC address is to be used for the Internet connection:
– Use default device MAC address: You can leave this default setting if the MAC
address of the Giga762SX WLAN dsl is used for connecting to the Internet.
– Use MAC address of this PC: Select this option if the MAC address of the cur-
rently connected PC has previously been registered for connecting to the Internet
or if you have re-registered the MAC address of the PC on which you are currently
working.
68