Security > E-Mail Configuration; Security Configuration(Cp 1543Sp-1); Vpn; Vpn (Virtual Private Network) - Siemens ET 200SP Operating Instructions Manual

Configuration and operation

4.6 Security configuration(CP 1543SP-1)

4.5.11 Security > E-mail configuration
E-mail configuration
● No configuration
As default, the sending of e-mails is disabled.
● Activate SMTP
Enable this option if you want to use the sending of unencrypted e-mails via SMTP port
25.
● Enable SSL/TLS
If your e-mail service provider only supports encrypted transfer, enable this option. Select
the protocol via the port number:
– Port no. 587
– Port no. 465
Ask your e.mail service provider which option is supported.
If you want to use an Internet connection with an IPv6 infrastructure, note the information
in the section IPv6 (Page 43).
4.6 Security configuration(CP 1543SP-1)
4.6.1

VPN

4.6.1.1

VPN (Virtual Private Network)

VPN tunnel
Virtual Private Network (VPN) is a technology for secure transportation of confidential data in
public IP networks, for example the Internet. With VPN, a secure connection (tunnel) is set
up and operated between two secure IT systems or networks via a non-secure network.
One of the main features of the VPN tunnel is that it forwards all frames even from protocols
of higher layers (HTTP, FTP etc.).
The data traffic between two network components is transported practically unrestricted
through another network. This allows entire networks to be connected together via a
neighboring or intermediate network.
86
When using STARTTLS the CP sends encrypted e-mails.
When using SSL/TLS (SMTPS) the CP sends encrypted e-mails.
CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
Operating Instructions, 01/2017, C79000-G8976-C426-03