Renewing Ip Address On Client Pc; Configure Pc To Get Ip Address From Dhcp - Siemens CL-010 User Manual

Adsl2+ router
Table of Contents

Advertisement

14.
Under the General tab,
enable Use the following IP
address. Enter the IP
address: 192.168.1.x (x is
between 2 and 254), Subnet
Mask: 255.255.255.0 and
Default gateway:
192.168.1.1. Then click Ok.

Renewing IP Address on Client PC

After the ADSL Router gets on line, there is a chance that your
PC does not renew its IP address and thus causes the PC not
able to access the Internet. To solve this problem, please follow
the procedures below to renew PC's IP address.

Configure PC to get IP address from DHCP

If your ADSL Router operates as a DHCP server for the client PCs on the LAN, you should
configure the client PCs to obtain a dynamic IP address. Please follow the previous section to install
TCP/IP component. Only that you do not need to specify an IP address when configuring TCP/IP
properties.
The following section describe the procedures for CPEs to get IP address:
For Windows 98

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cl-010-iCl-110Cl-110-i

Table of Contents