Log Permanent Size - Allied Telesis AR2050V Command Reference Manual

L C
OGGING OMMANDS

LOG PERMANENT SIZE

log permanent size
Overview This command configures the amount of memory that the permanent log is
permitted to use. Once this memory allocation has been filled old messages will be
deleted to make room for new messages.
log permanent size <50-250>
Syntax
Mode Global Configuration
Example To allow the permanent log to use up to 100 kB of NVS use the following
commands:
awplus#
awplus(config)#
Related clear log permanent
Commands
copy permanent-log
default log permanent
log permanent
log permanent (filter)
log permanent exclude
show log config
show log permanent
C613-50186-01 Rev B
Parameter Description
<50-250>
Size of the permanent log in kilobytes
configure terminal
log permanent size 100
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
348