Log External Size - Allied Telesis AR2050V Command Reference Manual

L C
OGGING OMMANDS

LOG EXTERNAL SIZE

log external size
Overview Use this command to configure the total amount of size that the external log is
permitted to use, in kilobytes. The maximum possible depends on the storage
device's file system.
Note that if you are rotating between multiple files, this is the maximum size of all
files, not of each individual file. For example, if you are rotating between 2 files (log
external rotate 1), each file will have a maximum size of 25 kBytes by default.
Use the no variant of this command to return to the default size.
log external size [<50-4194304>]
Syntax
no log external size
Default 50 kBytes
Mode Global Configuration
Example To configure a total log size of 100 kBytes, use the commands:
awplus#
awplus(config)#
Related clear log external
Commands
default log external
log external
log external (filter)
log external exclude
log external rotate
log external size
show log config
show log external
unmount
Command Version 5.4.7-1.1: command added
changes
C613-50186-01 Rev B
Parameter Description
<50-4194304>
The total amount of size that the external log is permitted to use,
in kilobytes.
configure terminal
log external size 100
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
321