Show Connection-Log Events - Allied Telesis AR2050V Command Reference Manual

L C
OGGING OMMANDS
-
SHOW CONNECTION LOG EVENTS

show connection-log events

Overview This command displays the configuration state (enabled or disabled) for the
logging of connections passing through the firewall, as configured by the
connection-log events
show connection-log events
Syntax
Mode User Exec
Example To show the logging configuration state for the connections passing through the
firewall, use the command:
awplus#
Output Figure 7-1:
Related connection-log events
Commands
Command Version 5.4.7-1.1: command added.
changes
C613-50186-01 Rev B
command.
show connection-log events
Example output from show connection-log events
awplus#show connection-log events 
Log new connection events:
Log connection end events:
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Disabled
Enabled
353