Log External (Filter) - Allied Telesis AR2050V Command Reference Manual

L C
OGGING OMMANDS
( )
LOG EXTERNAL FILTER

log external (filter)

Overview Use this command to create a filter to select messages to be sent to the external
log. You can include messages based on:
•
•
•
•
•
The no variant of this command removes the corresponding filter, so that the
specified messages are no longer sent to the external log.
log external [level <level>] [program <program-name>] [facility
Syntax
<facility>] [msgtext <text-string>]
no log external [level <level>] [program <program-name>]
[facility <facility>] [msgtext <text-string>]
Parameter Description
level
Filter messages to the external log by severity level.
<level>
The minimum severity of message to send to the external log. The level can be specified as
one of the following numbers or level names, where 0 is the highest severity and 7 is the
lowest severity:
0|emergencies
1|alerts
2|critical
3|errors
4|warnings
5|notices
6|informational
7|debugging
program
Filter messages to the external log by program. Include messages from a specified program in
the external log.
<program-
The name of a program to log messages from, either one of the following predefined program
name>
names (not case-sensitive), or another program name (case-sensitive) that you find in the log
output:
rip
ripng
ospf
C613-50186-01 Rev B
the priority/severity of the message
the program that generated the message
the logging facility used
a sub-string within the message, or
a combination of some or all of these.
System is unusable
Action must be taken immediately
Critical conditions
Error conditions
Warning conditions
Normal, but significant, conditions
Informational messages
Debug-level messages
Routing Information Protocol (RIP)
Routing Information Protocol - next generation (RIPng)
Open Shortest Path First (OSPF)
Command Reference for AR2050V
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
313