Toyota Celica Supra 1986 Service And Repair Manual page 756

NiPPOndtMO
AIR CONDITIONING SYSTEM - Compr8$$0r
INSTALLATION OF COMPRESSOR
(See
p101
AC-24)
AC-35
1. INSTALL COMPRESSOR WITH MOUNTING BOLTS
Torque: 280 kr-cm (20 ft-lb, 27 N -m)
2.
INSTALL DRIVE BELT
(a) lnmll the drive belt to the pulley.
(b) Adjust the belt with the adjusting bolts.
L-- - -- - - - --"""' " "' . ' - "' - =:::: ' ...
:::::.~ '
(c) Using a belt tension gauge, check the drive belt ten·
sion.
Bolt tension gaullf:
Nippondenso BTG-20 (95506.()()()20) or
Borroughs No. BT-33-73F
Drive belt tension
N-
belt
125
t
251b
Used belt 80
t
20 lb
NOTE:
• " New belt" refers to
a
belt which has been used less
than
5
minutes on a running engine.
• " Used belt" refers to a belt which has been used on a
running engine for
5
minutes or more.
3. CONNECT TWO FLEXIBLE HOSES TO COMPRESSOR
SERVICE VALVES
Torque: Dischtrllf line
226
kg-em
(16 ft·lb, 22 N·ml
Suction line 325 kg-cm
(24 ft-lb, 32 N-ml
4. CONNECT CLUTCH LEAD WIRE TO WIRIN G
HARNESS
5. CONNECT NEGATIVE CABLE TO BATTERY
6. EVACUATE AND CHARGE REFRIGERATION
SYSTEM (See
p101
AC-12)