Toyota Celica Supra 1986 Service And Repair Manual page 330

•
AUTOMATIC TRANSMISSION - Component Groups (Overdrive Input Shaft and Clutch) AT·66
Overdrive Input Shaft and Clutch
Plate Disc
00 Clutch Hub
Ring
Piston Return Sprin9
00
Ctu~ch
Piston
Snap Ring
Thinner Snap Ring
Flange
00 Clutch Drum
Cushton Plate
Bearing
1
0
Washer Plug
Th""' Wash4tr
Snap Ring One·way Clutch
Planetary Gear
DISASSEMBL V OF OVERDRIVE INPUT SHAFT AND
CLUTCH
1. REMOVE THRUST BEARINGS AND RACES FROM
OVERDRIVE INPUT SHAFT
2 .
(a) Slide off the thrust bearing and race from the clutch
side by hand. Note the position of the races.
(b) Using a screwdriver, pry off the thrust washer from
the planetary gear side.
PULL OVERDRIVE CLUTCH ASSEMBLY FROM INPUT
SHAFT
CAUTION: Be caref ul that the thNSt bearing and race do
not fall out.
3. REMOVE THRUST BEARING AND RACE
Note the position of the race.