Toyota Celica Supra 1986 Service And Repair Manual page 414

I
FRONT AXLE AND SUSPENSION - Front Axle Shock Absorber
REMOVAL OF FRONT SHOCK ABSORBER
ASSEMBLY
1. DISCONNECT BRAKE TUBE
FA·11
Using SST and an open end wrench, disconnect the brake
tube from the flexible hose.
Drain the brake fluid into a container.
SST 09751-36011
2. REMOVE THREE NUTS
3. REMOVE TWO BOLTS
Remove the two bolts mounting the shock absorber
assembly to the steering knuckle arm.
4. REMOVE FRONT SHOCK ABSORBER, FRONT AXLE
HUB AN D BRAKE CALIPER
NOTE : Collars extend into the steering knuckle bolt
holes about 5 mm (0.20 in.) deep.
Push the suspension lower arm down and remove the front
shock absorber, front axle hub and brake caliper.
5. MOUNT FRONT SHOCK ABSORBER IN VISE OR
LOCKING PLATE (SST)
SST 09720.()()()11 (0972HJ0080)