Toyota Celica Supra 1986 Service And Repair Manual page 233

CL-4
( '~ )-
1-
CLUTCH -Clutch Master Cylinder
CLUTCH MASTER CYLINDER
COMPONENTS
I --
Re.servoir Tank
Push Rod
Piston
'~ClutCh
Line Union Nut
~
,, . . 111, 15ll
Boot
Clip
l
' '
, ,
'
' ·'
I
kg-em lft·lb. N·ml l
: Spe(:ified
torque
REMOVAL OF MASTER CYLINDER
1. REMOVE CLEVIS PIN AND CLIP
2. DISCONNECT CLUTCH LINE UNION
Using SST, d isconnect the union nut.
SST 09751 -36011
3. REMOVE MASTER CYLINDER
(a) Remove the mounti ng nut and bolt.
(b) Pull out the master cyl inder.
DISASSEMBLY OF MASTER CYLINDER
1. REMOVE RESERVOIR TANK
Remove the hold-down bolt and pull off t he rt!iervoir tank.
2. REMOVE PUSH ROD AND PISTON
(a) Pu II back the boot and. using a screwdriver, remove
the snap ring.
(b) Pull out the push rod, washer and piston.
ASSEMBLY OF MASTER CYLINDER
1.
COAT PARTS WITH LITHIUM SOAP BASE GLYCOL
I
GREASE, AS SHOWN
2.
INSERT PISTON INTO CYLINDER
3. INSTALL PUSH ROO ASSEMBLY WITH SNAP RING
4. INSTALL RESERVOIR TANK
Torque: 250 kg-an (18 ft-lb, 25 N-m)
I
I
I