Toyota Celica Supra 1986 Service And Repair Manual page 215

Termini! C
SWitch Body
TerminaJ 50
STARTING SYSTEM - Starter ST-7
"""
'"""
Bearings
1. CHECK BEARINGS
Tum each bearing by hand while applying inward force.
If resistance is felt or if the bearing sticks, replace the
bearing.
2 .
IF NECESSARY. REPlACE BEARINGS
{a) Using SST, remove the bearing from the armature
shaft.
tb l Using SST, remove the other bearing from the oppo-
site side.
SST 09286·46011
(c) Using
SST
and press, tap the front bearing onto the
shaft.
SST 09201-4 1020
l d l Using a press, instoll the rear bearing onto the shaft.
Magnetic Switch
1. PERFORM PUll-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter, cheek for continuity between termi·
nal 50 and the terminal C.
If
there is no continuity, replace the magnetic switch.
2. PERFORM HOLD-IN COIL OPEN CIRCUIT TEST
Using an ohmmeter. check for continuity between terml·
nal 50 and switch body.
If there is no continuity, replace the magnetic swit ch.