Toyota Celica Supra 1986 Service And Repair Manual page 421

FA-18
FRONT AXLE AND SUSPENSI ON - Front Suspension
Strut Bar
(See
page FA-14)
REMOVAL OF STRUT BAR
1. REMOVE STRUT 8AR FROM BRACKET
Remove the nut and strut bar from the bracket.
NOTE : Do not remow the staked nut.
2.
REMOVE STRUT BAR FROM LOWER ARM
Jack up the lower arm and disconnect the strut 001.
Remove the bolt holding t he strut bar to the lower arm,
and disconnect the strut bar.
INSTALLATION OF STRUT BAR
1. ADJUST STAKED NUT
Check that the distance between the staked nut and cenl!r
369.1 mm
of the bolt hole is 369.1 mm (14.531 in.). Adjust staked
nut as necessary.
NOTE: Do not move staked nut unless required.
2.
CONNECT STRUT BAR TO LOWER ARM
Connect the strut bar to the lower arm wi th a bolt. Torqut
the bolt.
Torque: 670 kg-em (48 ft·lb, 66 N.m)
3.
CONNECT STRUT BAR TO BRACKET
Connect the strut bar to the bracket with
a
nut. Torque
the nut.
Torque: 1.050 kg-em (76 ft·lb •. 103 N-m)
4.
CHECK FRONT WHEEL ALI GNMEN
T AND SIDE SLIP
(See
page
FA-3)