Toyota Celica Supra 1986 Service And Repair Manual page 682

30mm
(1.18/"1
~ -
'
3mm
(0.12
in.)
((
BODY - Moulding B0-13
1. BEND A SMALL SCREWDRIVER AT RIGHT
ANGLE
2.
3.
4.
REMOVE WIPER ARM
REMOVE JOINT COVER
(a) Remove me two screws under the side moulding.
(b) Push the side moulding down.
(c) Remove the joint cover from upper moulding.
REMOVE SIDE MOULDING
(a} Insert the tip of the screwdriver between the mould·
ing and clip, and twist it to pry loose the clips (A)
on
the
window side.
(b) Pry loose the fastene,.. and cliPS and remove the
moulding.
6. REMOVE UPPER MOULDING
(a) Pry loose the fasteners and clips.