Toyota Celica Supra 1986 Service And Repair Manual page 465

REAR AXLE AND SUSPENSION - limited Slip Differential
RA-43
"'""'
4 . INSTALL CASE COVER BOLTS
(a) Apply retaining compound to the bolts.
NOTE : Use Lock-Ti ght
as
the retaining compound.
NOTE : Method of applying Lock-Tight.
(1)
Apply Lock-Tight Primer T to the case threads and
the mounting bolts, and allow to dry thoroughly.
(2) Apply Lock-Tight to the case threads and the bolts
and install the bolts.
(3)
Allow to stand at least
3
hours after tightening the
bolts. (In cold weather. heat to 30 -
so•c
(86 -
t22°F) before letting stand.)
(b) Tighten the bolts evenly and gradually.
Torque: 650 kg-em (47 ft-lb, 64 N·m)
6 .
CHECK SIDE GEAR THRUST CLEARANCE
Turn the side gear with side gear shaft or other means
and check to see thatthev turn smoothly.
6. I NSTALL SIDE BEARING (See page RA·28)
INSTALLATION OF DIFFERENTIAL
1. INSTALL DIFFERENTIAL CASE IN CARRIER
(See page RA·30)
2. INSTALL DIFFERENTIAL
(See page
RA·36)