Toyota Celica Supra 1986 Service And Repair Manual page 486

BRAKE SYSTEM - Master Cylinder BR-9
-
MASTER CYLINDER
COMPONENTS
~ICap and
Strainer
ti---Boot
REMOVAL OF MASTER CYLINDER
1.
2.
CAUTION:
Do
not let brake fluid remain on a painted
surface. Wash it off immediately.
DISCONNECT LEVEL WARNING SWITCH
CONNECTOR
DISCONNECT TWO BRAKE TUBES
Using SST, disconnect two brake tubes from the master
cylinder.
SST 09751 ·36011
3. REMOVE MASTER CYLINDER
(a) Remove the lour nuts.
\ (b) Remove the master cylinder and gasket from the
-
brake booster.
DISASSEMBLY OF MASTER CYL.INDER
1. PLACE CYLINDER IN VISE
2. DISCONNECT RESERVOIR AND HOSE
Remove the cap, Wainer, bolt and hose.
3. REMOVE SNAP RING AND ELBOW
4. REMOVE TWO OUTLET PLUGS