Toyota Celica Supra 1986 Service And Repair Manual page 390

.
AUTOMATIC TRANSMISSION - Assembly of Transmission AT-115
Neutral Basic Line
Bolt
49. INSTALL SPEED SENSOR IN EXTENSION HOUSING
60. INSTALL NEW 0-RINGS. BUSHING AND SPEEDOMETER
DRIVEN GEAR TO SHAFT SLEEVE
51. INSTALL SPEEDOMETER DRIVEN GEAR ASSEMBLY IN
EXTENSION HOUSING
Insert the shaft sleeve assembly into the housing. Install
the lock plate with the bolt and lock washer.
52. INSTALL NEUTRAL START SWITCH
(a) Slide the neutral start swi tch onto the control shaft.
(bl Install the grommet facing the groove toward the
switch body and then install the washer and nut.
(c) Move the switch so that the slit in the switch and neu-
tral basic line match up. Tighten the bolt and nut.
Torque: Bolt 55 kg-em (48 in-lb. 5.4 N •ml
Nut 70 kg-em (61 in-lb. 6.9 N •m)
53. INSTALL SHIFT HANDLE