Toyota Celica Supra 1986 Service And Repair Manual page 680

BODY - Back Door
BACK DOOR
ADJUSTMENT OF BACK DOOR
B0-11
(a) For forward/rearward and left/right adjustments,
loosen the bolts.
(b) For vertical adjustment of the front end o f the lid,
increase or decrease the number of washers.
ADJUSTMENT OF LOCK AND STRIKER
{a) Remove the lower back panel cover.
(b) Adjust lock and striker by loosening mounting bolts.
Back Door Damper Stay
CAUTION : Handling the damper.
(a) Do not disassemble the damper because the cylinder
is !iliad with gas.
(b) If the damper is damped, drill a 2.0 - 3.0 mm (0.079
- 0.118 in.) hole in tho bottom of the removed
damper cylinder to completely release the high-pres-
sure gas.
(c) When drilling, chips may fly out so work carefully.
{d) The gas is oolorloss, odorless and not poisonous.
(e) When working, handle the damper carefully. Never
score or scratch the exposed
part
of the piston rod,
and never alk>w paint or oil to
get
on it.
(f)
Do not tum the piston rod and cylinder with the
damper fully extendad.
REMOVAL OF DAMPER STAY
1.
REMOVE DAMPER STAY UPPER SIDE FROM
BACK DOOR
2. REMOVE DAMPER STAY LOWER SIDE FROM
REAR PILLAR
INSTALLATION OF DAMPER STAY
1. INSTALL DAMPER STAY UPPER SIDE TO BACK
DOOR
2. CONNECT DAMPER STAY LOWER SIDE TO REAR
PILLAR