Toyota Celica Supra 1986 Service And Repair Manual page 688

......
1101110
-
BODY - Moulding
80·19
INSTALLATION OF DOOR BELT MOULDING
1. INSTALL BELT MOU LDI NG
(a) Tap the moulding onto th t et ips by hand.
(b) Install the moulding with the two oerews.
2. INSTALL FOLLOWING PARTS:
(a) Door weatherstrip on both ends
(b) Door trim (See page
80·9)
REMOVAL OF OUTSIDE MOULDING
1. REMOVE MOULDING MOUNTING NUT
Remove the mou ldi. n g mount ing nut tnom the rNr side of
the door.
2. REMOVE MOULDING
Using a oeraper, pry loose tht e lips and remove the mould·
ing .
INSTALLATION OF OUTSIDE MOULDING
1. BEFORE INSTALLING MOULDING. REPLACE CAPS
Remove the remaining eaps on the elip installation holt of
the body, and install , _ e.ps.
2. INSTALL MOULD! NG
(a) Install the elips to the moulding.
(b) Install the moulding onto tho panel by hand.
3. INSTALL MOULDING MOUNTING NUT
REMOVAL OF ROCKER PANEL MOULDING
REMOVE MOULDING
(a) Romcwe the three oerews.
(b) Pry loose the elips with t oeraper and remove the
mould ing.
INSTALLATION OF ROCKER PANEL
MOULDING .
1. BEFORE INSTALLI NG MOULDING, REPLACE CAPS
Remove the remaining c:IPS on the clip installation hokl of
tho body, and install , _ eaps.
2. INSTALL MOULDING BY HAND
Tap the moulding onto the elips by hand.
3. INSTALL THREE SCREWS