Toyota Celica Supra 1986 Service And Repair Manual page 687

B0-18
BODY -Moulding
INSTALLATION OF QUARTER CORNER
MOULDING
1. INSTALL CORNER MOULDING
(a} Install the moulding.
{b) Install the screw over the cushion rubber.
2. INSTALL QUARTER TRIM AND GARNISH
REMOVAL OF CENTER PILLAR GARNISH
1. REMOVE FOLLOWING PARTS:
(a} Seat belt guide
2.
(bl Seat belt shoulder another bolt
(c) Inner garnish
REMOVE OUTSIDE GARNISH
Remove the two set nuts and remove the garnish.
INSTAUATION OF CENTER PILLAR GARNISH
1. INSTALL OUTSIDE GARNISH
2. INSTALL FOLLOWING PARTS:
(a) Inner garnish
(b) Seat belt shoulder anchor bolt
(c) Seat belt guide
REMOVAL OF DOOR BELT MOULDING
1. REMOVE FOLLOWING PARTS:
(a) Door trim panel (See page 80-4)
(b} Door weatherstrips on both ends
2. REMOVE DOOR BELT MOULDING
(a) Remove two screws from the moulding.
(b) Pry
loose the clips with a scraper and remove the
belt moulding.