Toyota Celica Supra 1986 Service And Repair Manual page 751

AC·30 AIR CONDITIONI NG SYSTEM - Compressor
10.
REMOVE FRONT VALVE PLATE
Remove the two pins from the front housing. Discard the
pins.
11.
REMOVE REAR HOUSING
Using a hammer and punch, remove the rear
housin~
by
tapping on the protrusion.
CAUTION: Be
...t\11
not to scntdl the seoling surface
of the ..- housing.
12.
REMOVE FRONT AND REAR O·RINGS FROM
CYLINDER BLOCK
Diseard the ().rings.
ASSEMBLY
Of COMPRESSOR
(See ~
AC·271
1.
INSTALL REAR VALVE PLATE ON REAR CYLINDER
(al Install the
two
pins in tho rear cylinder.
(bl Lubricate a new 0-<ing with compressor oil. Install
the O·ring in tho roar cylinder.
(c) Install the rear suction
val~~e
over the pins on tho rear
cylinder.
NOTE: The front and rear suction valves are the same.