Toyota Celica Supra 1986 Service And Repair Manual page 684

BODY - Moulding
B0-15
3. APPLY ADHESIVE AT CLIP INSTALLATION AREA
4. INSTALL UPPER MOULDING
5.
6.
(a) Place the moulding onto the body.
(b) Pry up the clips on the body side and install to the
moulding.
(c) Tap the moulding w ith your hand to fasten the clips
at the glass edge.
A t the same time, install the fasteners by tappi ng
them by hand.
(d)
If the moulding
is not at the same level as the body,
insert a scraper between them and tap on the moulding
while pushing on the fastener.
INSTALL SIDE MOULDING IN SAME MANNER AS
FOR UPPER MOULDING
INSTALL JOINT COVER
(a) Slide the side moulding
do1Ml.
(b) Install the joint
cover
to the upper moulding.
(c~
Connect
the
side moulding into the joint cover.
7. INSTALL SCREW ON MOULDING
8. INSTALL WIPER ARM