Toyota Celica Supra 1986 Service And Repair Manual page 499

BR-22
BRAKE SYSTEM - Rear Brake
REMOVAL OF CYLINDER
(See page BR-20)
1. DISCONN ECT BRAKE HOSE FROM BRAKE TUBE
AND CYLINDER
(a) Using SST and a spanner, disconnect the brake tube
from the hose.
SST 09751-36011
(b) Use a container to catch the brake fluid.
(c) Remove the clip from brake hose.
(d) Disconnect the brake hose from the cylinder.
2. REMOVE CYLINDER
(a) Hold the sliding bushing and unscrew the cylinder
installation bolt.
(b) Lift up and push out the cylinder from t he tor""
plate pin.
3. REMOVE FOLLOWING PARTS:
(a) Anti-squeal shim
(b) Brake pads
(c) Anti-rattle springs
(d) Pad guide plates
(e) Pad support plate
DISASSEMBLY OF CYLINDER
(See
page BR-20)
1. REMOVE SLIDING BUSHING AND BOOT