Toyota Celica Supra 1986 Service And Repair Manual page 430

RA-8
MP
SST
REAR AXLE AND SUSPENSION - IRS Type Rear Axle Shaft
.......
3. PACK BEARINGS WITH MP GREASE NO. 2
• Use a pressure bearing lubricator
if
available.
OR
• Place bearings in a handful of grease. Force grease into
t he bearing until completely filled. ·
4 .
INSTALL INSIDE BEARING OUTER RACE
(a) Using SST, install the bearing inside outer race in lhe
rear axle housing.
SST 09550·2201 1 (09550-00020, 09550·00040)
(b) Install the beari ng.
6. INSTALL NEW INNER OIL SEAL
(a)
Using SST, drive in
a
new oil seal to a depth of
31
mm
(1
.22 in.l.
SST 09550·2201 1 (09550·00020, 09550·00040)
(b) Apply MP grease No. 2 to the oil seal lip.
6. INSTALL OUTSIDE BEARING OUTER RACE
Using SST. install the bearing outside outer race in the
rear axle housing.
SST 09550·2201 1 (09550.()()020, 09550.00050)
7. PACK INSIDE OF REAR AXLE HOUSING WITH
MP
GREASE NO.2
8. COAT OUTSIDE OF NEW SPACER WITH MP GREASt
NO.2
9. INSTALL NEW SPACER INTO HUB