Toyota Celica Supra 1986 Service And Repair Manual page 370

AUTOMATIC TRANSMISSION - Component Groups (Valve Body)
AT-95
ATOIOf
5. ASSEMBLE THROTTLE CAM
(a) Insert the sleeve through one side of the cam.
lb} Install the spring with the hook through the hole in
the cam.
6. INSTALL CAM ASSEMBLY ON UPP£R FRONT VALVE
BOOY
Check the position of the spring ends with the figure.
Tighten the bolt.
Torque: 75 kg-em (65 in.-lb, 7.4 N·m}
7. INSTALL SECONDARY REGULATOR VALVE
(a) Partially install the cover plate and insert the spring
and secondary regulator valve.
(bl Compress the spring and swing the cover plate into
place.
(c) Install the second bolt in the cover plate and tighten
both bolts.
Torque: 66 kg-em (48 ln.-lb. 5.4 N·m}
8. INSERT SPRING AND CUT·BACK VALVE
Install the valve with smaller end first.
9. INSTALL PLUG AND VALVE RETAINER
Coat the retainer with petroleum jelly to keep it in p lace.