Toyota Celica Supra 1986 Service And Repair Manual page 419

FA-18 FRONT AXLE AND SUSPENSION - Front Suspension
~:;;.i~
Wirt Ends
~
toward
Rear Side
of Ball
Joint
REPLACEMENT OF LOWER ARM DUST COVER
1. REMOVE OUST COVER
Remow the
dust
cover set ring and dust cover.
2.
INSTALL OUST COVER
(a)
Apply ball joint
grease
to section "A" and "B"
ofa
new dust cover.
(b)
Install the dust cover with the
esc-
valve "C"
focirt
the
rear of car.
(c) Wind wire
twice
around the dust cover and bend tt.
wire knot down.
(d) Remove the plug and install
the
grease fitting.
(e) Fill with ball joint grease.
Molybdenum Oisulphide Lithium
Base Grease:
NLGI No. 1 or No. 2
(f)
Remove the grease fitting and install the plug.
REPLACEMENT OF LOWER ARM BUSHING
1. REMOVE LOWER ARM BUSHING
Using SST, press out the bushing from the lower arm.
SST 09726·12022
{09726·01030, 09726-01040, 09726-01010)
2. INSTALL LOWER ARM BUSHING
Using SST, press the bushing into
the
lower arm.
SST 09726· 12022
(09726-01030, 09726-01040, 09726-01020)